|
We have changed the construction design of the beam to eliminate the tubing and are now all plate work.
Here is the construction of the beam, there is an inner 3/16 plate the runs the length and 2 outer 3/16 plate that have 2 70* brakes in both of them that forms a prismatic shape when they come together. It has 2 welded surfaces down the length of each beam. The 3 plate are penetrated at the same time in 1 welded pass.
Giant Motorsports' new Prismatic I-Beam, design maximizes cross section in both axis's. This produces an I-Beam that is resistive to bending from shock and bump loads and from collision loads from hitting large rocks or ruts.
Extended Beams. Bolts in to stock cross member and getting up to 21” of wheel travel
Available in 5” (can be used with a lifted replacement coil) 6”, 7” & 8” pair side.
There are 2 equal length beam options:
Pre run $3100. Using a stock 5 on 4.5 spindle
Race $3500. Using a Dana 44 5 on 5.5 spindle
Both kits come with: beams 6”,7”,8” or 9”pier side, radius arms, bolt on frame mounts, hiems and spacers.
|
