Upper and lower 4-link tabs
$275.00
(options)
63.5″ to W.M.S (housing centered) stock Ford 9″
66″ or 69″ to W.M.S (housing off set) stock Ford 9″
For ordering
Call or text us today – 714-265-1450
[email protected]
Related products
-
Weld It Yourself 4-link frame pivots
$350.00Add to cartBolt on frame 3 or 4 link pivots works: All new Bolt on frame link pivots works with any open C channel frames, designed to be use with a 3 or 4 link application. This link shock mounts are a great starting point to making your own bed cage with linking your truck. Can be …
-
Weld It Yourself Link
$475.00 – $675.00Select optionsThe GIANT Motorsports Weld It Yourself Link is made out of P&O mild so you can tig or MIG weld the two lower link arms. The side plates are 3/16′, and the top plates are 1/8′. The kit includes 1.75′ x .120 D.O.M. tube, the forward bushing sleeve, 1.25′ threaded sleeves for the rear, and 7/8 …
-
Link Shock Mounts Flat
$275.00Add to cartThis link shock mounts are a great starting point to making your own bed cage with linking your truck. Can be used with a single coil over shock and ad the by-pass later or ready for both the first time. The (upper) flat top style pushes the tube 4.25″ more forward then the (lower) Dome …
-
Axle Truss
$550.00Select optionsWeld on axle truss with removable cover Keep you axle from bending or the tub coming lose from the center section with the truss system. To fit the truss plates to the axle. There is a lot of fitting to get the truss on a housing. –Preload the axle before welding by attaching a long …