Weld It Yourself Link
$475.00 – $675.00
The GIANT Motorsports Weld It Yourself Link is made out of P&O mild so you can tig or MIG weld the two lower link arms.
The side plates are 3/16′, and the top plates are 1/8′.
The kit includes 1.75′ x .120 D.O.M. tube, the forward bushing sleeve, 1.25′ threaded sleeves for the rear, and 7/8 x .188 chrome-moly boss for two shock mounting locations on each arm.
The length between the center of the bushing to the center of the heim is 55′. The shock mounting locations divided are 1′ back from the center.
We have been racing and running these arms for years, using a 3′ king by-pass valve with extra compression to work without a hydraulic bump stop. We put all the force into the center of the arm, testing the stress, and have encountered zero problems.
The complete kit includes instructions and instructions to construct two lower-link arms.
WIY truss & 4-link mounts to set up a stock 9″
Giant TT housing any width with semi ends welded on
Upper shock mounts Dome | Flat
For ordering
Call or text us today – 714-265-1450
info@giantmotorsports.com
You may also like…
-
4-Link Pivots
$475.00Add to cartBolt on frame 3 or 4 link pivots works: All new Bolt on frame link pivots works with any open C channel frames, designed to be use with a 3 or 4 link application. $475.00 Weld It Yourself version. $350.00 This link shock mounts are a great starting point to making your own bed cage …
Related products
-
Weld it Yourself 2WD Equal Length I-Beam plate Kit
$450.00Add to cartWeld It yourself equal length beam kit includes: Main beam plates End caps plates Tear drop plate Back layer plates Front overlay 1 ¼ threaded bungs You will need to provide hiems, Dana 4WD ends, tubing and welding. To construct these beams, you will need to set the width and ride height. Cut Dana 4WD end …
-
Link Shock Mounts Dome
$275.00Add to cartThis link shock mounts are a great starting point to making your own bed cage with linking your truck. Can be used with a single coil over shock and ad the by-pass later or ready for both the first time. For ordering Call or text us today – 714-265-1450 info@giantmotorsports.com
-
Axle Truss
$550.00Select optionsWeld It Yourself axle truss without removable cover Keep you axle from bending or the tub coming lose from the center section with the truss system. -NO need to preload the axle before welding Will fit all cased center rear axles. We even have and off set one for a front axle. 14 Bolt Chrysler …
-
Upper 4-link tabs
$175.00Add to cart63.5″ to W.M.S (housing centered) stock Ford 9″ 66″ or 69″ to W.M.S (housing off set) stock Ford 9″ For ordering Call or text us today – 714-265-1450 info@giantmotorsports.com
