Link Shock Mounts Flat
$275.00
This link shock mounts are a great starting point to making your own bed cage with linking your truck. Can be used with a single coil over shock and ad the by-pass later or ready for both the first time.
The (upper) flat top style pushes the tube 4.25″ more forward then the (lower) Dome top.
For ordering
Call or text us today – 714-265-1450
[email protected]
Related products
-
Axle Truss
$550.00Select optionsWeld on axle truss with removable cover Keep you axle from bending or the tub coming lose from the center section with the truss system. To fit the truss plates to the axle. There is a lot of fitting to get the truss on a housing. –Preload the axle before welding by attaching a long …
-
Truss & 4-Link Tab Kit for 9″ Axles
$425.00Add to cartTruss & 4-Link Tab Kit for 9″ Axles This kit has been redesigned for improved straight and easier assembly. 2 kits Available for offset housings with equal length axles or centered housings. Some fitting required to the truss. 63.5″ to W.M.S (housing centered) stock Ford 9″ 66″ or 69″ to W.M.S (housing off set) stock …
-
Weld it Yourself 2WD Equal Length I-Beam plate Kit
$450.00Add to cartWeld It yourself equal length beam kit includes: Main beam plates End caps plates Tear drop plate Back layer plates Front overlay 1 ¼ threaded bungs You will need to provide hiems, Dana 4WD ends, tubing and welding. To construct these beams, you will need to set the width and ride height. Cut Dana 4WD end …
-
Shackles – WIY – Toyota, S-10, Nissan, Explorer
$195.00Add to cartThis shackle is great for helping you mount 62” or pre-runner springs on Toyota, S-10, Nissan, explorer or any truck that came with the springs under the frame rail. $195. Includes parts to make a pair of 12” shackles and the frame mounts. For ordering Call or text us today – 714-265-1450 [email protected]