Weld it Yourself 2WD Equal Length I-Beam plate Kit
$450.00
Weld It yourself equal length beam kit includes:
- Main beam plates
- End caps plates
- Tear drop plate
- Back layer plates
- Front overlay
- 1 ¼ threaded bungs
You will need to provide hiems, Dana 4WD ends, tubing and welding.
To construct these beams, you will need to set the width and ride height.
- Cut Dana 4WD end just past threaded radius arm hole and cap with WIY plate.
- Cut and bend 1 ¾” tubing to match main plates.
- Bolt on beam pivots, hiem.
- Bung, top beam tube and set desired width and ride height.
- Fit bottom tube plate in and weld.
Never weld with hiem in bung and never thread hiem into bung until 100% cooled.
Here are other parts that will help you complete the beam kit if needed.
- $325.00 Beam tub cut and bent.
- $550.00 Ford Eq. beam pivots (welded).
- $675.00 Toyota Beam piovts/cross member (welded).
- $325.00 Chevy & Dodge beam pivots (welded).
- $225 radius arm pivots (welded).
- $275 WIY radius arm kit includes: Attaching plates, Connector plates & 1 ¼ threaded bungs.
Good level fab. skills required.
For ordering
Call or text us today – 714-265-1450
[email protected]
Related products
-
Weld It Yourself 4-link frame pivots
$350.00Add to cartBolt on frame 3 or 4 link pivots works: All new Bolt on frame link pivots works with any open C channel frames, designed to be use with a 3 or 4 link application. This link shock mounts are a great starting point to making your own bed cage with linking your truck. Can be …
-
Axle Truss
$550.00Select options This product has multiple variants. The options may be chosen on the product pageWeld It Yourself axle truss without removable cover Keep you axle from bending or the tub coming lose from the center section with the truss system. -NO need to preload the axle before welding Will fit all cased center rear axles. We even have and off set one for a front axle. 14 Bolt Chrysler …
-
Link Shock Mounts Flat
$275.00Add to cartThis link shock mounts are a great starting point to making your own bed cage with linking your truck. Can be used with a single coil over shock and ad the by-pass later or ready for both the first time. The (upper) flat top style pushes the tube 4.25″ more forward then the (lower) Dome …
-
Shackles – WIY – Toyota, S-10, Nissan, Explorer
$195.00Add to cartThis shackle is great for helping you mount 62” or pre-runner springs on Toyota, S-10, Nissan, explorer or any truck that came with the springs under the frame rail. $195. Includes parts to make a pair of 12” shackles and the frame mounts. For ordering Call or text us today – 714-265-1450 [email protected]
