Shackles – WIY – Toyota, S-10, Nissan, Explorer
$195.00
This shackle is great for helping you mount 62” or pre-runner springs on Toyota, S-10, Nissan, explorer or any truck that came with the springs under the frame rail.
$195. Includes parts to make a pair of 12” shackles and the frame mounts.
For ordering
Call or text us today – 714-265-1450
[email protected]
Related products
-
Equal Length I-Beam Kit
$450.00Add to cartWeld It yourself equal length beam kit includes: Main beam plates End caps plates Tear drop plate Back layer plates Front overlay 1 ¼ threaded bungs You will need to provide hiems, Dana 4WD ends, tubing and welding. To construct these beams, you will need to set the width and ride height. Cut Dana 4WD end …
-
Weld It Yourself 4-link frame pivots
$350.00Add to cartBolt on frame 3 or 4 link pivots works: All new Bolt on frame link pivots works with any open C channel frames, designed to be use with a 3 or 4 link application. This link shock mounts are a great starting point to making your own bed cage with linking your truck. Can be …
-
Truss & 4-Link Tab Kit for 9″ Axles
$425.00Add to cartTruss & 4-Link Tab Kit for 9″ Axles This kit has been redesigned for improved straight and easier assembly. 2 kits Available for offset housings with equal length axles or centered housings. Some fitting required to the truss. 63.5″ to W.M.S (housing centered) stock Ford 9″ 66″ or 69″ to W.M.S (housing off set) stock …
-
Link Shock Mounts Dome
$275.00Add to cartThis link shock mounts are a great starting point to making your own bed cage with linking your truck. Can be used with a single coil over shock and ad the by-pass later or ready for both the first time. For ordering Call or text us today – 714-265-1450 [email protected]