Lower 4-Link Tabs
$185.00
Weld-on lower link tabs and overlay that fit any axle diameter, link arm size, and placement. A flexible foundation for any custom 4-link lower arm suspension build.
The Most Flexible Lower Link Tab Available
The GIANT MotorSports Lower 4-Link Tabs are designed around maximum adaptability: they fit any axle diameter, accept any link arm size, and can be positioned anywhere on the axle housing. For builders doing a custom 4-link lower arm setup where exact placement matters, these tabs do not force you into a fixed geometry — you position them where your suspension math says they need to be, then weld.
What Is Included
- Lower link tabs with overlay (pair)
When to Use Lower Tabs vs a Complete Set
If you are buying the Upper and Lower 4-Link Tabs combo, you get both axle positions in one order. The lower tabs alone are for builders who already have upper tabs sorted, who are replacing worn lower tabs on an existing 4-link, or who are building an unusual geometry where upper and lower tab placement comes from different sources.
Compatible Axles
Any cased rear axle. Commonly used with Ford 9\”, Dana 44, Dana 60, GM 12-bolt, and Sterling housings, but the fit-any-diameter design means they work on whatever axle is in your build. If you have an unusual housing diameter or center section offset, call 714-265-1450 to confirm before ordering.
Pairs With
Upper 4-Link Tabs (Ford 9\” centered or offset), 4-Link Frame Pivots (Boxed or Open C-Channel), Link Shock Mounts (Dome Top or Flat Top), and Link Arms. All sold separately.
Related products
-
WIY Shackles – Toyota, S-10, Nissan, Explorer
$195.00Add to cartWeld-it-yourself shackle kit for mounting 62″ or pre-runner springs on Toyota, S-10, Nissan, Explorer, and more. Makes a pair of 12″ shackles with all frame mount hardware — at half the cost of the bolt-on version.
-
Axle Truss – Weld It Yourself
$550.00Select options This product has multiple variants. The options may be chosen on the product pageWeld-it-yourself axle truss to prevent axle bending and center section separation. No axle preload required before welding. Fits most common rear axles — Dana 35, Dana 44, Dana 60, Ford 8.8, GM 11.5, Sterling, and more.
-
Weld It Yourself 4-Link Frame Pivots
$350.00Add to cartWeld-it-yourself bolt-on frame pivots for 3 or 4-link builds on open C-channel frames. Budget entry point for linking your truck with a single coil-over or bypass shock setup.
-
Weld It Yourself 2WD Equal Length I-Beam Plate Kit
$450.00Add to cartWeld-it-yourself equal-length I-beam plate kit for custom 2WD long-travel front suspension. Includes main beam plates, end caps, teardrop plates, back layer plates, front overlay, and threaded bungs. Tubing, heims, and welding required.