Category: Weld it and do it yourself parts
Giant Motorsports Weld it Yourself parts are pre-fabricated for the do-it-yourself race enthusiast. We will provide you with the fabricated parts for you to finish up on your project, with some instructions provided. We have Link Kits, I Beam Kits, and more products to come in this category.
Showing all 12 results
-
Axle Truss
$550.00Select optionsWeld on axle truss with removable cover Keep you axle from bending or the tub coming lose from the center section with the truss system. To fit the truss plates to the axle. There is a lot of fitting to get the truss on a housing. –Preload the axle before welding by attaching a long …
-
Equal Length I-Beam Kit
$450.00Add to cartWeld It yourself equal length beam kit includes: Main beam plates End caps plates Tear drop plate Back layer plates Front overlay 1 ¼ threaded bungs You will need to provide hiems, Dana 4WD ends, tubing and welding. To construct these beams, you will need to set the width and ride height. Cut Dana 4WD end …
-
Link Shock Mounts Dome
$275.00Add to cartThis link shock mounts are a great starting point to making your own bed cage with linking your truck. Can be used with a single coil over shock and ad the by-pass later or ready for both the first time. For ordering Call or text us today – 714-265-1450 [email protected]
-
Link Shock Mounts Flat
$275.00Add to cartThis link shock mounts are a great starting point to making your own bed cage with linking your truck. Can be used with a single coil over shock and ad the by-pass later or ready for both the first time. The (upper) flat top style pushes the tube 4.25″ more forward then the (lower) Dome …
-
Lower link tabs
$185.00Add to cartWIY Lower link tabs and overlay will fit on to any axle diameter, link arm and placement. For ordering Call or text us today – 714-265-1450 [email protected]
-
Shackles – WIY – Toyota, S-10, Nissan, Explorer
$195.00Add to cartThis shackle is great for helping you mount 62” or pre-runner springs on Toyota, S-10, Nissan, explorer or any truck that came with the springs under the frame rail. $195. Includes parts to make a pair of 12” shackles and the frame mounts. For ordering Call or text us today – 714-265-1450 [email protected]
-
Truss & 4-Link Tab Kit for 9″ Axles
$425.00Add to cartTruss & 4-Link Tab Kit for 9″ Axles This kit has been redesigned for improved straight and easier assembly. 2 kits Available for offset housings with equal length axles or centered housings. Some fitting required to the truss. 63.5″ to W.M.S (housing centered) stock Ford 9″ 66″ or 69″ to W.M.S (housing off set) stock …
-
Upper 4-link tabs
$150.00Add to cart63.5″ to W.M.S (housing centered) stock Ford 9″ 66″ or 69″ to W.M.S (housing off set) stock Ford 9″ For ordering Call or text us today – 714-265-1450 [email protected]
-
Upper and lower 4-link tabs
$275.00Add to cart(options) 63.5″ to W.M.S (housing centered) stock Ford 9″ 66″ or 69″ to W.M.S (housing off set) stock Ford 9″ For ordering Call or text us today – 714-265-1450 [email protected]
-
Weld It Yourself 4-link frame pivots
$350.00Add to cartBolt on frame 3 or 4 link pivots works: All new Bolt on frame link pivots works with any open C channel frames, designed to be use with a 3 or 4 link application. This link shock mounts are a great starting point to making your own bed cage with linking your truck. Can be …
-
Weld It Yourself Link
$475.00 – $675.00Select optionsThe GIANT Motorsports Weld It Yourself Link is made out of P&O mild so you can tig or MIG weld the two lower link arms. The side plates are 3/16′, and the top plates are 1/8′. The kit includes 1.75′ x .120 D.O.M. tube, the forward bushing sleeve, 1.25′ threaded sleeves for the rear, and 7/8 …
-
WIY F-150 | F-250 | Bronco Bumper
$450.00Add to cartWeld it Yourself bumper fits 92-96 F Series Ford trucks and can work on earlier models by welding the main mount on the inside of the frame. For ordering Call or text us today – 714-265-1450 [email protected]