Ranger I-Beam Long Travel Kit
$3,550.00
Prismatic all-plate equal-length I-beam kit for Ford Rangers. 3/16″ inner and outer plates form a prismatic shape for maximum cross-sectional strength. Mounts a Dana 44 spindle for serious long-travel performance.
The Prismatic Beam Design — Why It Is Stronger Than Tubing
Most I-beam designs use a round or square tube as the primary structural member with plates welded on. The GIANT MotorSports Ranger I-Beam Long Travel Kit uses a patented all-plate prismatic design — three 3/16\” plates joined in a single welded pass to form a triangular cross-section. No tubing required.
The prismatic shape resists bending in the critical direction (lateral loads from cornering and impact) more efficiently than a tube of equivalent weight. The single-pass weld joining the plates is a continuous weld — not a series of plug welds or tacked seams that can propagate cracks under cyclic loading.
Specifications
- Compatible vehicle: Ford Ranger
- Beam material: Three 3/16\” plates (prismatic cross-section)
- Spindle: Dana 44
- Design: Patented prismatic all-plate
Dana 44 Spindle
Mounts Dana 44 spindles — sourced separately from wrecking yards or aftermarket suppliers. The Dana 44 5-on-5.5\” bolt pattern is standard. If you need a specific bolt pattern for wheel compatibility, call 714-265-1450 to discuss options before ordering.
What You Will Also Need
Dana 44 spindles, Ranger Crossover Steering Swinger Kit, Ranger/Explorer Engine Cage for coil-over mounting, and coil-overs sized to your planned travel. For 86-97 4WD Rangers on the TTB platform, see also the Dana 44 TTB Conversion Kit as an alternative front suspension approach.
Related products
-
Bronco / F-150 Equal Length I-Beam Kit
$3,550.00Add to cartEqual-length I-beam kit for 80-96 Ford F-150 and Bronco. Beams extend 84–92″ outside tire-to-tire, mounting Dana 44 spindles. Includes radius arms and bolt-on frame mounts.
-
Toyota I-Beam Conversion Kit – 2005 and Up
$3,850.00Add to cartI-beam conversion kit for 2005 and newer Toyota trucks. Moves wheels forward 3.0″ with crossover steering and Dana 44 spindle mounts. Includes beams, frame pivots, cross member, radius arms, and passenger steering swinger. Welded to stock frame.
-
Ford Expedition / Excursion 2WD I-Beam Long Travel Kit
$4,000.00Add to cartEqual-length I-beam long-travel kit for Ford Expedition and Excursion 2WD. Achieve 19–21″ of wheel travel with the optional crossover steering upgrade. Available as individual components or as a complete combo kit.
-
Chevy C10 I-Beam Conversion Kit
$3,700.00Add to cartI-beam conversion kit for 1970–1986 Chevy C10 trucks. Choose 5-on-5.5 or 6-on-5.5 lug pattern with 80–90″ track width. Bolt-on cross member replaces stock A-arm setup. Includes equal-length beams and Dana 44 spindle.