Link Shock Mounts – Flat Top
$275.00
Flat-top link shock mounts for building a linked truck bed cage. Works with a single coil-over or combined bypass shock setup. Sits 4.25″ further forward than the dome-top version for different fitment requirements.
Flat Top: The Further-Out Shock Position
The flat-top link shock mounts position the shock tube 4.25\” further outboard than the dome-top version. That extra distance is the right call when your bed cage geometry benefits from a wider shock placement — common in longer-wheelbase trucks, builds using larger bypass shocks, or setups where the coilover needs to be angled outward for clearance reasons.
What Is Included
- Flat-top link shock mounts (pair)
Dome Top vs Flat Top — The Short Version
Dome top: shock sits 4.25\” closer to the truck. Flat top: shock sits 4.25\” further out. Choose based on your specific shock body, bed length, and cab clearance. If you are building both a coilover and a bypass shock into the same cage, flat top often works better because the wider position gives the bypass shock room to run alongside the coilover without fighting for space. Unsure? Call 714-265-1450 and we will sort it out for your specific build.
Shock Compatibility
Works with a single coil-over or combined coil-over and bypass shock setup. Pairs with Link Killer Shocks and Solid Shock Co. coil-overs. See those listings for shock sizing and pricing.
Installation Notes
Weld-on. Shock angle is determined by mount position — measure your shock stroke and axle travel range before finalizing position. Still requires careful positioning before final weld despite the more forgiving outboard placement.
Related products
-
WIY Shackles – Toyota, S-10, Nissan, Explorer
$195.00Add to cartWeld-it-yourself shackle kit for mounting 62″ or pre-runner springs on Toyota, S-10, Nissan, Explorer, and more. Makes a pair of 12″ shackles with all frame mount hardware — at half the cost of the bolt-on version.
-
Weld It Yourself 2WD Equal Length I-Beam Plate Kit
$450.00Add to cartWeld-it-yourself equal-length I-beam plate kit for custom 2WD long-travel front suspension. Includes main beam plates, end caps, teardrop plates, back layer plates, front overlay, and threaded bungs. Tubing, heims, and welding required.
-
Link Shock Mounts – Dome Top
$275.00Add to cartDome-top link shock mounts — the starting point for building a linked truck bed cage. Compatible with a single coil-over or combined bypass shock setup. Sits 4.25″ less forward than the flat-top version.
-
Weld It Yourself Link Arms
Price range: $475.00 through $675.00Select options This product has multiple variants. The options may be chosen on the product pageWeld-it-yourself lower link arm kit in P&O mild steel — MIG or TIG weldable. Includes 1.75″ x .120 DOM tube, bushing sleeves, and chrome-moly shock mounting bosses. 55″ center-to-center with two shock mounting locations per arm.