Name: Bronco / F-150 4" Lift Beam Pivots
SKU: 781
Availability: InStock

Bronco / F-150 4″ Lift Beam Pivots

$875.00

4″ lift beam pivots for 80-96 Ford F-150 and Bronco. Reduces wheel scrub for more travel, cycles a longer 14″ shock, relieves suspension stress, and corrects steering geometry. Works with 2WD stock beams. Up to 19″ of travel.

What Raising the Pivot 4\” Actually Does

The factory I-beam pivot height on 80-96 F-150 and Bronco trucks was optimized for stock beam width and stock travel. Add wider beams or more coil-over stroke, and the factory pivot geometry starts working against you: wheel scrub increases, the shock cycles through a shorter effective stroke, and suspension stress concentrates incorrectly.

Raising the pivot point 4\” corrects all of this simultaneously. Wheel scrub decreases for more usable travel. The 14\” shock cycles efficiently through its full stroke. Suspension stress distributes more evenly. Steering geometry through the travel arc becomes more controlled. Up to 19\” of wheel travel.

What Is Included

4\” lift beam pivot brackets (pair)

Specifications

Compatible vehicles: 1980-1996 Ford F-150 and Bronco
Pivot height increase: 4\”
Shock length enabled: 14\”
Maximum wheel travel: Up to 19\”
Also works with 2WD stock beams

Works with 2WD Stock Beams

These pivot brackets also work with factory 2WD stock beams. If you are looking to improve performance of a stock-beam 2WD Bronco or F-150 without a full beam conversion, this is the single most impactful change you can make to the front suspension geometry.

Pairs With

Bronco/F-150 Equal Length I-Beam Kit, F-150/Bronco Engine Cage 80-96, and appropriate 14\” coil-overs. Call 714-265-1450 for shock recommendations matched to the 4\” pivot setup.