Weld It Yourself Link Arms
Price range: $475.00 through $675.00
Weld-it-yourself lower link arm kit in P&O mild steel — MIG or TIG weldable. Includes 1.75″ x .120 DOM tube, bushing sleeves, and chrome-moly shock mounting bosses. 55″ center-to-center with two shock mounting locations per arm.
The GIANT MotorSports Weld It Yourself Link is made from P&O mild steel and is designed to be MIG or TIG welded. Side plates are 3/16", top plates are 1/8", and the kit comes with 1.75" x .120 DOM tube, the forward bushing sleeve, 1.25" threaded rear sleeves, and 7/8" x .188" chrome-moly bosses at two shock mounting locations per arm. Length between centers: 55".
Specifications
- Material: P&O mild steel (MIG or TIG weldable)
- Side plates: 3/16″
- Top plates: 1/8″
- Tube: 1.75″ x .120″ D.O.M.
- Center-to-center length: 55″
- Shock mounts per arm: 2
- Shock boss: 7/8″ x .188″ chrome-moly
What’s Included
- 1.75″ x .120 DOM tube
- Forward bushing sleeve
- 1.25″ threaded rear sleeves
- Chrome-moly shock mounting bosses (2 per arm)
Notes & Options
- Welding required — all cut and ready to fit together
You May Also Need
Order or Ask a Question
Call or text us at 714-265-1450 or email [email protected] — we build everything custom and can answer any fitment questions.
| WIY Link | Link arm kit W/O hiems or bushing, Link arm W/O tubes, bungs, bosses or sleeves |
|---|
You may also like…
-
4-Link Pivots – Open C-Channel Frame
$475.00Add to cartBolt-on frame pivots for 3 or 4-link builds on open C-channel frame trucks. Available bolt-on ($475) or weld-it-yourself ($350). Works with a single coil-over shock or combined bypass setup.
Related products
-
Axle Truss – Weld It Yourself
$550.00Select options This product has multiple variants. The options may be chosen on the product pageWeld-it-yourself axle truss to prevent axle bending and center section separation. No axle preload required before welding. Fits most common rear axles — Dana 35, Dana 44, Dana 60, Ford 8.8, GM 11.5, Sterling, and more.
-
WIY Shackles – Toyota, S-10, Nissan, Explorer
$195.00Add to cartWeld-it-yourself shackle kit for mounting 62″ or pre-runner springs on Toyota, S-10, Nissan, Explorer, and more. Makes a pair of 12″ shackles with all frame mount hardware — at half the cost of the bolt-on version.
-
Weld It Yourself 2WD Equal Length I-Beam Plate Kit
$450.00Add to cartWeld-it-yourself equal-length I-beam plate kit for custom 2WD long-travel front suspension. Includes main beam plates, end caps, teardrop plates, back layer plates, front overlay, and threaded bungs. Tubing, heims, and welding required.
-
Link Shock Mounts – Dome Top
$275.00Add to cartDome-top link shock mounts — the starting point for building a linked truck bed cage. Compatible with a single coil-over or combined bypass shock setup. Sits 4.25″ less forward than the flat-top version.