WIY Shackles – Toyota, S-10, Nissan, Explorer
$195.00
Weld-it-yourself shackle kit for mounting 62″ or pre-runner springs on Toyota, S-10, Nissan, Explorer, and more. Makes a pair of 12″ shackles with all frame mount hardware — at half the cost of the bolt-on version.
Weld-it-yourself shackle kit for mounting 62" or pre-runner springs on Toyota, Chevy S-10, Nissan, Explorer, and other trucks where the springs run under the frame rail. Makes a complete pair of 12" shackles including all frame mount hardware — at half the cost of the bolt-on version.
Specifications
- Shackle length: 12″ (when assembled)
- Compatible: Toyota, S-10, Nissan, Explorer, and other spring-under-frame trucks
What’s Included
- Shackle material for 2 completed 12″ shackles
- Frame mount hardware
Notes & Options
- Welding required
- Ready-to-install bolt-on version also available for $325
You May Also Need
Order or Ask a Question
Call or text us at 714-265-1450 or email [email protected] — we build everything custom and can answer any fitment questions.
Related products
-
Link Shock Mounts – Dome Top
$275.00Add to cartDome-top link shock mounts — the starting point for building a linked truck bed cage. Compatible with a single coil-over or combined bypass shock setup. Sits 4.25″ less forward than the flat-top version.
-
WIY Front Bumper – F-150 / F-250 / Bronco
$450.00Add to cartWeld-it-yourself front bumper kit for 92–96 Ford F-150, F-250, and Bronco. Main mount welds to the inside of the frame for earlier model fitment. Simple construction yields a strong, custom look at a DIY price.
-
Upper and Lower 4-Link Tabs – Ford 9″
$325.00Add to cartUpper and lower 4-link tab combo set for Ford 9″ rear axles. Available in centered (63.5″ to WMS) or offset (66″ or 69″ to WMS) configurations. Weld-on tabs for custom 4-link suspension builds.
-
Axle Truss – Weld It Yourself
$550.00Select options This product has multiple variants. The options may be chosen on the product pageWeld-it-yourself axle truss to prevent axle bending and center section separation. No axle preload required before welding. Fits most common rear axles — Dana 35, Dana 44, Dana 60, Ford 8.8, GM 11.5, Sterling, and more.