WIY Shackles – Toyota, S-10, Nissan, Explorer
$195.00
Weld-it-yourself shackle kit for mounting 62″ or pre-runner springs on Toyota, S-10, Nissan, Explorer, and more. Makes a pair of 12″ shackles with all frame mount hardware — at half the cost of the bolt-on version.
Weld-it-yourself shackle kit for mounting 62" or pre-runner springs on Toyota, Chevy S-10, Nissan, Explorer, and other trucks where the springs run under the frame rail. Makes a complete pair of 12" shackles including all frame mount hardware — at half the cost of the bolt-on version.
Specifications
- Shackle length: 12″ (when assembled)
- Compatible: Toyota, S-10, Nissan, Explorer, and other spring-under-frame trucks
What’s Included
- Shackle material for 2 completed 12″ shackles
- Frame mount hardware
Notes & Options
- Welding required
- Ready-to-install bolt-on version also available for $325
You May Also Need
Order or Ask a Question
Call or text us at 714-265-1450 or email [email protected] — we build everything custom and can answer any fitment questions.
Related products
-
Upper and Lower 4-Link Tabs – Ford 9″
$325.00Add to cartUpper and lower 4-link tab combo set for Ford 9″ rear axles. Available in centered (63.5″ to WMS) or offset (66″ or 69″ to WMS) configurations. Weld-on tabs for custom 4-link suspension builds.
-
Upper 4-Link Tabs – Ford 9″
$175.00Add to cartWeld-on upper 4-link tabs for Ford 9″ rear axles. Available in centered (63.5″ to WMS) or offset (66″ or 69″ to WMS) housing configurations. Perfect starting point for custom upper link arm placement.
-
Axle Truss – Weld It Yourself
$550.00Select options This product has multiple variants. The options may be chosen on the product pageWeld-it-yourself axle truss to prevent axle bending and center section separation. No axle preload required before welding. Fits most common rear axles — Dana 35, Dana 44, Dana 60, Ford 8.8, GM 11.5, Sterling, and more.
-
Weld It Yourself 4-Link Frame Pivots
$350.00Add to cartWeld-it-yourself bolt-on frame pivots for 3 or 4-link builds on open C-channel frames. Budget entry point for linking your truck with a single coil-over or bypass shock setup.